具有以下特点：
（1）塔体：型线合理，气流平稳，材质采用耐热耐水型树脂，玻纤布采用中无捻布，色彩鲜艳，表面胶衣树脂内含有抗紫外线剂，耐老化，强 度高，重量轻，耐腐蚀。下塔体按订货要求，可配有溢水、排污有效降低了滴水声。
（2）填料：采用改性聚乙烯波片，横向增加凸筋，水的再分配能力更强，阻力更小，散热性能更佳，阻燃性更好，能耐高温70度、低温50 度。
（3）旋转布水器及布水管：装有不锈钢球轴承，运转灵活可靠，水头低，布水均匀，采用铝合金或玻璃钢制成的布水管，管上安装收水板，克服了飘水现象。
（4）风机：由清华大学工程力学系根据系列冷却塔参数设计的低噪声、 效率风机，铝合金板翼型或玻璃钢叶片、噪声小、效率更高。
（5）电机：由清华大学电机系在Y型系列安装尺寸的础上，为冷却塔设计的低噪声节能电机、密封防水性能好、耐高温、效率高、噪声小。
（6）减速装置：采用了涤纶纤维增强丁橡胶动力带传动，耐高温、效率高，遇水不伸展，克服了打滑现象，噪声很小。
（7）吸声设施：超低噪声型冷却塔在进风口外增加了带吸声材料的，并在上下两部装有吸声栅，以达到****的降噪效果。在上塔体出风口安装了带吸声材料的喇叭口及吸声栅，降低了风机及电机传出来的噪声。
（8）进风窗：装有玻璃钢百叶片，减少飘水，气流阻力小，特别适合北方地区及全年都需要使用冷却塔的单位。
（9）风叶：专门为冷却设计的专用风叶。材料为铝合金（小型塔采用A.B.S材料）。具有塔机匹配合理、风量大、噪音小、效率高、运转平稳、风速均匀、耗电省、寿命长等特点。
（10）支架：所有风机、填料、进风窗、塔体等处钢支架为装配式，镀锌或涂漆防腐。紧固件都采用镀锌或不锈钢螺栓。
Has the following characteristics:
(1): tower type line is reasonable, smooth airflow and heat resistance is made of resin, glass fiber cloth fabrics, with bright color, surface coating resin containing anti UV agent, aging resistance, high strength, light weight, corrosion resistance. According to the requirements of the order, the tower can be equipped with overflow, sewage effectively reduce the sound of dripping water.
Packing: (2) using modified polyethylene plate, lateral ribs increase, water redistribution ability is stronger, less resistance, better heat dissipation, better flame retardant, high temperature, low temperature 70 degrees 50 degrees.
(3) rotary water distributor and distributing pipe: a stainless steel ball bearing, flexible and reliable operation, low pressure, water distribution uniformity, using Aluminum Alloy or glass cloth made of steel pipes, installation of water collecting plate pipe, overcomes the water drift phenomenon.
(4) fan: low noise, efficiency fan designed by Engineering Mechanics Department of Tsinghua University according to series cooling tower parameters, aluminum alloy plate airfoil or glass fiber reinforced plastic blade, small noise, high efficiency.
(5) from the Tsinghua University Department of electrical engineering in motor: Y series installation dimensions of the basis for energy-saving low noise motor, cooling tower design and sealing good waterproof performance, high temperature resistance, high efficiency, low noise.
(6) deceleration device: the use of polyester fiber reinforced butyl rubber power belt transmission, high temperature, high efficiency, water does not stretch, to overcome the slipping phenomenon, noise is very small.
(7) absorption facilities: ultra low noise type cooling tower at the inlet opening increases with sound-absorbing material and sound-absorbing, gate is provided on the two parts, in order to achieve the maximum noise reduction effect. The tower body is installed on the air outlet trumpet and absorption grating with sound-absorbing material, reduces the noise of fan and motor came out.
(8) air inlet window: equipped with glass fiber reinforced plastic shutter, to reduce floating water, air flow resistance is small, especially suitable for northern areas and throughout the year need to use the cooling tower units.
(9) blades: special blades for cooling design. Material for aluminum alloy (small tower with A.B.S material). The tower crane has the characteristics of reasonable matching, large volume, low noise, high efficiency, stable operation, uniform speed, low power consumption, long service life etc..
(10) all support: fan, filler, the air inlet window, the tower body of steel bracket is assembled, galvanized or painted anti-corrosion. Fasteners are galvanized or stainless steel bolts.
免责声明：以上信息由企业自行提供，信息内容的真实性、准确性和合法性由相关企业负责，北极星环保设备网提醒您订购产品或服务时，谨慎核实供应商资质及产品质量等信息。如发现侵权行为或任何疑问，请第一时间与环保设备网工作人员取得联系。
京公网安备11010502034458号电子公告服务专项备案
供应商档案
